Back
Fleet Management • Inspections

SA5020 Air Flow & Temp Probe reading 1908 on HMI or on LCP

This procedure indicates the measured airflow and temperature data being relayed from the probe to the system interface. This value should be checked against standard operating parameters to confirm proper process conditions. Regular monitoring helps detect sensor drift, blockages, or abnormal temperature fluctuations that could affect system performance.
Orege North America
08/20/2025

SA5020 Air Flow & Temp Probe reading 1908 on HMI or on LCP

This procedure indicates the measured airflow and temperature data being relayed from the probe to the system interface. This value should be checked against standard operating parameters to confirm proper process conditions. Regular monitoring helps detect sensor drift, blockages, or abnormal temperature fluctuations that could affect system performance.
Source: Orege North America (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.