PAV Pan Verification Record
PAV Pan Verification Record is a structured process used to verify the accuracy and compliance of pan data, ensuring proper dimensions, pressure control, and temperature regulation during testing. This verification helps maintain consistency in operations, prevents errors in measurement, and ensures equipment meets required standards for performance and safety. Regular verification enhances reliability, reduces maintenance costs, and supports compliance with industry regulations.
Ergon - Lubbock 14842
06/11/2024
PAV Pan Verification Record
PAV Pan Verification Record is a structured process used to verify the accuracy and compliance of pan data, ensuring proper dimensions, pressure control, and temperature regulation during testing. This verification helps maintain consistency in operations, prevents errors in measurement, and ensures equipment meets required standards for performance and safety. Regular verification enhances reliability, reduces maintenance costs, and supports compliance with industry regulations.
Verified By
Date
Equipment/Model
Caliper ID
Tin # 1
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #2
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #3
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #4
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #5
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #6
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #7
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #8
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #9
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #10
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #11
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #12
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #13
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #14
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #15
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #16
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #17
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #18
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #19
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Tin #20
Inside diameter, 140 +/- 1mm
Depth, 9.5 +/- 1.5mm
Thickness, approximately .6 mm
Bottom not badly warped
Maintenance Items
Make sure PAV pan is flat by setting on a level surface and pushing down on 3 points about 120 degrees apart. If pan does not sit flat, remove and replace.
Action Recommended
Comments
Source: Ergon - Lubbock 14842 (Community Member)