Sample 3
Use this guide for the routine inspection of your equipment. If your equipment is well maintained, it's less likely to breakdown, which leads to increased uptime, more working hours for the equipment, fewer repair costs, and therefore increased revenue.
Mitek North America - Daily press inspection
02/09/2023
Sample 3
Use this guide for the routine inspection of your equipment. If your equipment is well maintained, it's less likely to breakdown, which leads to increased uptime, more working hours for the equipment, fewer repair costs, and therefore increased revenue.
PRESS NO
Inspection Date
WARNING!
Check the Brake & Clutch with 90 degree test
Check the tension on "V" belts. (VISUAL)
A slack V belt feels dead when you thump it with your hand. A proper V-Belt has an alive springiness. Don't Tighten Belts too tight as this will cause undue stretch to the belt and increase the load on the bearings.
Is the coolant system operational (VISUAL)
Check to see if Lubrication points are receiving proper Lubrication & Check Press Oil Level
Is the Sensor for the Decoiler in Right position?
Is the Bottom clean out plug in air separator clean
Inspected by
Click here to sign
Source: Mitek North America - Daily press inspection (Community Member)