Back

Omnizone™ Remote Air-Cooled Condenser 09XC: Maintenance and Inspection

This procedure is for the maintenance and inspection of your Remote Air-Cooled Condenser that focuses on air filters.
MaintainX
09/13/2022

Omnizone™ Remote Air-Cooled Condenser 09XC: Maintenance and Inspection

This procedure is for the maintenance and inspection of your Remote Air-Cooled Condenser that focuses on air filters.

    MAINTENANCE

    Cleaning

    The unit should be thoroughly cleaned inside and out. Frequency of cleaning will depend on unit location and area conditions. Drains must be kept free of dirt and trash. Coils can be cleaned with a stiff brush, vacuum cleaner, or compressed air. Coil can be reached through access panels.

    Inspection

    Check coil baffles for tight fit to prevent air from bypassing the coil.

    • Pass
    • Flag
    • Fail

    Check panels for air leakage, particularly those sealing the fan and coil compartments.

    • Pass
    • Flag
    • Fail

    Check for loose electrical connections, proper refrigerant charge, and refrigerant piping leaks.

    • Pass
    • Flag
    • Fail

    Air Filters

    Air filters may be installed on the condenser air inlet. Air filters should be replaced or cleaned on a regular basis depending on how dirty the operating environment is. Failure to clean air filters regularly will result in loss of unit performance and possible nuisance tripping of the high-pressure switch.

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.