Back
General • Inspections

Motors and Pumps Preventive Maintenance

This procedure outlines the quarterly preventive maintenance for Motors and pumps, focusing on safety, visual inspection, bearing inspection, cleaning, and checking the bushing collar for wear.
Hobby Center of the Preforming Arts
06/22/2025

Motors and Pumps Preventive Maintenance

This procedure outlines the quarterly preventive maintenance for Motors and pumps, focusing on safety, visual inspection, bearing inspection, cleaning, and checking the bushing collar for wear.

    While running

    Safety First

    Shutting down the motor and pump

    Visual Inspection

    Check the motor and pump exterior for cleanliness, leakage, and signs of damage or corrosion.

    Inspect the motor and pump enclosure, and cooling fans for any issues.

    Bearing Inspection

    Look for any signs of over greasing and overheating.

    • Pass
    • Flag
    • Fail

    Grease the bearing on the motor and/or pump that has grease inserts.

    Cleaning

    Bushing Collar Check

    Check the bushing collar between the motor and pump for wear.

    • Pass
    • Flag
    • Fail

    Restarting motor and pump

    Sign and Date

    Signature

    Click here to sign

    Date

Source: Hobby Center of the Preforming Arts (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.