Lantech Semi-Annual Inspection

Preparation and Notification

Identify sources of energy and Air pressure in relation to the maintenance task

Main power Disconnect switch located at the top right of the Lantech Cabinet
Infeed conveyors with manual switch controls mounted to conveyor supports
Main Air Lock out valve located on the left side of the Main cabinet

Notify all machine operators about the lockout

Fulfillment Team
Josh Pennington

Lock Out Procedure

Stop machine with normal shutdown procedures

Turn the power switch to off position and apply a lock

Press the e-stop on top or bottom of the machine and apply the LOTO tag

Apply LOTO tag to the control panel

Wait for electricity to discharge (in minutes)

Wait 5 minutes for electricity to discharge.

Verification

Verify the machine will not start up with an e-stop pressed

Yes
No
N / A

Verify the machine HMI will not power on with the power switch in the off position

Yes
No
N / A

Returning Machine to Service

Verify the machine is free of debris, tools, and is back in operating conditions

Ensure all employees are clear of the machine and all light curtains

Verify all of the controls are in neutral positions

Remove all of the lockout devices

Inform all operators that the maintenance on the machine is complete and that it can return to operating procedures

Lantech Semi-Annual Inspection

Lantech Semi-Annual Inspection

Lantech Wrapper Lock Out Tag Out Procedure

This procedure outlines the steps necessary to safely lock out and tag out the Lantech Wrapper to prevent injury from unexpected energization or release of stored energy during maintenance. It includes authorization, preparation, lock out, verification, and returning the machine to service.

Preparation and Notification

Identify sources of energy and Air pressure in relation to the maintenance task

Main power Disconnect switch located at the top right of the Lantech Cabinet

Infeed conveyors with manual switch controls mounted to conveyor supports

Main Air Lock out valve located on the left side of the Main cabinet

Notify all machine operators about the lockout

Fulfillment Team

Josh Pennington

Lock Out Procedure

Stop machine with normal shutdown procedures

Turn the power switch to off position and apply a lock

Press the e-stop on top or bottom of the machine and apply the LOTO tag

Apply LOTO tag to the control panel

Wait for electricity to discharge (in minutes)

Wait 5 minutes for electricity to discharge.

Verification

Verify the machine will not start up with an e-stop pressed

Verify the machine HMI will not power on with the power switch in the off position

Returning Machine to Service

Verify the machine is free of debris, tools, and is back in operating conditions

Ensure all employees are clear of the machine and all light curtains

Verify all of the controls are in neutral positions

Remove all of the lockout devices

Inform all operators that the maintenance on the machine is complete and that it can return to operating procedures

Main panel visual inspection

Safety Gate function test

Wrap arm and roller carriage visual

Air valve visual inspection

Roller Carriage Visual inspection

Roller Carriage drive and bearings

Lantech pallet conveyors