Back

Dental School Vacuum System Separator Tank LOTO Procedure: Construction Plumbing

Having a lockout/tag out program and procedures will reduce the risk of injury due to the unintended or inadvertent release of hazardous energy. Safety devices such as barrier guards or guarding devices are installed on systems to maintain worker safety while these systems are being operated.
MaintainX
07/26/2022

Dental School Vacuum System Separator Tank LOTO Procedure: Construction Plumbing

Having a lockout/tag out program and procedures will reduce the risk of injury due to the unintended or inadvertent release of hazardous energy. Safety devices such as barrier guards or guarding devices are installed on systems to maintain worker safety while these systems are being operated.

    • 1.png

    ENERGY SOURCES

    Energy Source (Magnitude):

    Energy Isolation Point or Control Step:

    Application Method and LOTO Device

    Step #

    • 2.png

    Energy Source (Magnitude)

    Energy Isolation Point or Control Step

    Application Method and LOTO Device

    Step #

    • 3.png

    LOCKOUT TAGOUT SEQUENCE

    Notify Employees

    Notify affected employees of LOTO activity

    Equipment Shutdown

    Shut down cold room by normal stopping procedure.

    • 4.png

    Isolate Energy

    Lockout Energy

    Dissipate Energy

    Verify Isolation

    Perform work

    RESTORE EQUIPMENT TO SERVICE SEQUENCE

    Clear Work Area

    Verify Controls

    Remove Lockout

    Notify Employees

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.