Bobcat Utility Vehicle 2200D: PRE-OPERATION AND DAILY SAFETY CHECKLIST

Use the following checklist as a guide to inspect the vehicle. This checklist should be used daily to ensure that the vehicle is in proper working condition and in conjunction with the on page 24. Any problems should be corrected by a Bobcat dealer or a trained technician.

General:

All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws are tight. Check hose clamps for tight fit.

Safety and information decals:

Check to ensure that all safety and information decals are in place. See pages 6.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Roll-over Protective Structure (ROPS):

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Safety belts:

Visually inspect for cuts, fraying, and loose parts. See ROLL-OVER PROTECTIVE STRUCTURE (ROPS) AND SAFETY BELTS on page 9.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Tires:

Check for proper tire pressure. Visually inspect tires for wear, damage, and proper inflation on a daily basis. See DIESEL VEHICLE SPECIFICATIONS on page 43.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Battery:

Check electrolyte to ensure it is at the proper level [Figure 29, Page 35]. Check battery posts. Wires should be tight and free of corrosion and battery should be fully charged.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Engine:

Check for proper engine oil and coolant levels and leaks. See on page 28 and on page 33. Check air filter and replace if necessary.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Fuel:

Check fuel level. See FUELING INSTRUCTIONS on page 34. Check fuel tank, lines, fuel cap, pump, fuel filters for fuel leakage. Drain water from the fuel filter. See Draining Water from Fuel Filter on page 34.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Exhaust system:

Check for leaks.

Hydraulic brakes:

Check fluid level. See BRAKE FLUID RESERVOIR on page 28.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Bobcat Utility Vehicle 2200D: PRE-OPERATION AND DAILY SAFETY CHECKLIST

Bobcat Utility Vehicle 2200D: PRE-OPERATION AND DAILY SAFETY CHECKLIST

Use the following checklist as a guide to inspect the vehicle. This checklist should be used daily to ensure that the vehicle is in proper working condition and in conjunction with the on page 24. Any problems should be corrected by a Bobcat dealer or a trained technician.

General:

All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws are tight. Check hose clamps for tight fit.

Safety and information decals:

Check to ensure that all safety and information decals are in place. See pages 6.

Roll-over Protective Structure (ROPS):

Roll-over Protective Structure (ROPS):

Safety belts:

Visually inspect for cuts, fraying, and loose parts. See ROLL-OVER PROTECTIVE STRUCTURE (ROPS) AND SAFETY BELTS on page 9.

Tires:

Check for proper tire pressure. Visually inspect tires for wear, damage, and proper inflation on a daily basis. See DIESEL VEHICLE SPECIFICATIONS on page 43.

Battery:

Check electrolyte to ensure it is at the proper level [Figure 29, Page 35]. Check battery posts. Wires should be tight and free of corrosion and battery should be fully charged.

Engine:

Check for proper engine oil and coolant levels and leaks. See on page 28 and on page 33. Check air filter and replace if necessary.

Fuel:

Check fuel level. See FUELING INSTRUCTIONS on page 34. Check fuel tank, lines, fuel cap, pump, fuel filters for fuel leakage. Drain water from the fuel filter. See Draining Water from Fuel Filter on page 34.

Exhaust system:

Check for leaks.

Hydraulic brakes:

Check fluid level. See BRAKE FLUID RESERVOIR on page 28.

Seat controls:

Check to be sure all seat controls are operating correctly. Be sure seat locks are engaged.