Back
General • Inspections

Roof Inspection

MaintainX
10/24/2021

Roof Inspection

    Company name:

    Building(s):

    Overall condition:

    • Pass
    • Flag
    • Fail

    Action planned:

    Instructions:

    1. Complete a form for each major building. Connected groups of smaller buildings may be included on one form.

    2. Any “yes” answer signifies a condition that needs to be repaired or examined by a qualified professional.

    3. Schedule repairs promptly. Roofs that require repair are more susceptible to windstorm damage.

    4. Complete this form twice a year and after severe storms.

    Items

    1. Are there any cracks, splits or loose seams in the roof covering?

    • Yes
    • No
    • N / A

    Actions/Comments

    2. Is there any blistering (may resemble bubbles) of the roof covering?

    • Yes
    • No
    • N / A

    Actions/Comments

    3. Is there any ponding or other evidence of water accumulation?

    • Yes
    • No
    • N / A

    Actions/Comments

    4. Are drains plugged or potentially blocked by debris or other material?

    • Yes
    • No
    • N / A

    Actions/Comments

    5. Are there any bare spots in the gravel or stone covering?

    • Yes
    • No
    • N / A

    Actions/Comments

    6. Is there any evidence of damage from hail?

    • Yes
    • No
    • N / A

    Actions/Comments

    7. Are gutters and downspouts clear of leaves or other obstructions?

    • Yes
    • No
    • N / A

    Actions/Comments

    8. Is there any loose or missing flashing around the edges (top and side), especially near the corners?

    • Yes
    • No
    • N / A

    Actions/Comments

    9. Are there any signs, antennas, microwave dishes or other roof-mounted equipment with loose or disconnected supports or guy wires?

    • Yes
    • No
    • N / A

    Actions/Comments

    10. Is there any evidence of leaking on the top floor of the building?

    • Yes
    • No
    • N / A

    Actions/Comments

    Notes: Avoid torch-applied roof coverings. If it is necessary to use a torch to repair an existing roof or install a new covering, require that a fire-watch with multiple fire extinguishers be immediately available on the roof. This is considered hot work. The owner should complete a hot work permit before the contractor commences his work.

Source: The Zurich Services Corporation (www.zurichna.com)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.