General • Inspections

Brim Dryer Annual PM

Dryer maintenance is done to improve efficiency, extend the appliance's life, prevent fires, save energy, and maintain better indoor air quality.

24k

08/23/2024

Brim Dryer Annual PM

Dryer maintenance is done to improve efficiency, extend the appliance's life, prevent fires, save energy, and maintain better indoor air quality.

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Lock Out Tag Out

LOTO Performed

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

ENERGY CONTROL PROGRAM

Perform LOTO in accordance with the LOTO Risk Assessment

Pass
Flag
Fail

Clean Dryer Cylinder

Remove foreign material from dryer cylinder

Pass
Flag
Fail

Lubricate gear box

Change oil in the drive motor gear box

Pass
Flag
Fail

Have Burners Tuned and Inspected

for Instructions

Pass
Flag
Fail

Repair made or needed:

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 24k (Community Member)

Brim Dryer Annual PM

Brim Dryer Annual PM

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

LOTO Performed

Yes

No

Food Safety Pre-Check

ENERGY CONTROL PROGRAM

Perform LOTO in accordance with the LOTO Risk Assessment

Clean Dryer Cylinder

Remove foreign material from dryer cylinder

Lubricate gear box

Change oil in the drive motor gear box

Have Burners Tuned and Inspected

for Instructions

Repair made or needed:

Food Safety Post-Check

*** LOTO Confirmation Statement - DO NOT EDIT/REMOVE ***

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

LOTO Performed

Yes

No

Food Safety Pre-Check

ENERGY CONTROL PROGRAM

Perform LOTO in accordance with the LOTO Risk Assessment

Clean Dryer Cylinder

Remove foreign material from dryer cylinder

Lubricate gear box

Change oil in the drive motor gear box

Have Burners Tuned and Inspected

for Instructions

Repair made or needed:

Food Safety Post-Check

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *