Back

ALLIED 80G2V Gas Furnace Yearly Maintenance

The ALLIED 80G2V Gas Furnace Yearly Maintenance procedure makes sure that your machine is in quality performing state.
MaintainX
04/26/2021

ALLIED 80G2V Gas Furnace Yearly Maintenance

42 steps
The ALLIED 80G2V Gas Furnace Yearly Maintenance procedure makes sure that your machine is in quality performing state.
  • Fresh air grilles and louvers (on the unit and in the room where the furnace is installed)

  • Burners

  • Must be inspected for

  • Vent pipe

  • Must be inspected for signs of

  • Unit appearance

  • Must be inspected for

  • Blower access panel

  • Return air duct

  • Operating performance

  • Combustion gases

  • Problems detected during the inspection may make it necessary to temporarily shut down the furnace until the items can be repaired or replaced.

  • Instruct the homeowners to pay attention to their furnace.

  • Repair Parts List

  • The following repair parts are available from the local distributor. When ordering parts, include the complete furnace model number and serial number which are printed on the rating plate located on the furnace. All service must be performed by a licensed

  • Cabinet Parts

  • Control Panel Parts

  • Blower Parts

  • Heat Parts

Source: Allied

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.