Back

HAUSCHILD Weekly PM

Authorized Team Members must isolate the equipment according to Chewy’s Hazardous Energy Control Policy and follow all lockout/tagout restrictions, as violations may result in disciplinary action. This weekly PM checks the machine exterior, electrical connections, lid, mixing chamber, cup holder, operating weight, vibration, and noise, then includes cleaning and photo documentation of any issues.
Global Enterprise - Chewy
09/15/2026

HAUSCHILD Weekly PM

Authorized Team Members are required to perform equipment isolation in accordance with Chewy's Hazardous Energy Control Policy as well as complying with the restrictions and limitations imposed upon them during the use of lockout tagout. Disciplinary action will be taken against all violators according to Chewy's disciplinary policy.

    Inspect Machine Exterior

    Check housing and stand wheels/feet for damage, looseness, contamination, or anything that could affect operation.

    • Pass
    • Flag
    • Fail

    Inspect power cord and electrical connections

    Check the power cord, plug and electrical connections for damage, looseness and abnormal conditions.

    • Pass
    • Flag
    • Fail

    Inspect Lid and Lid-Locking Components

    Check the lid, manual lid lock and locking components for damage, looseness or abnormal wear. Confirm lid closes and locks properly.

    • Pass
    • Flag
    • Fail

    Inspect the mixing basket / mixing chamber

    Open the lid and inspect the mixing basket and chamber confirm it is correctly seated and not damaged or showing any excessive wear or abnormal conditions.

    • Pass
    • Flag
    • Fail

    Inspect cup holder and mixing cup

    Check the cup holder and mixing cup for cracks, deformation, damage, excessive wear or abnormal conditions.

    • Pass
    • Flag
    • Fail

    Verify operating weight is within limits

    Verify total weight (cup + holder+ material) is within weight limits. Verify with pharmacy tech logs/

    • Pass
    • Flag
    • Fail

    Check for abnormal vibration and Noise

    Verify the unit has no abnormal vibration or noise.

    • Pass
    • Flag
    • Fail

    Clean machine

    Clean machine and inspect for any external damage or abnormalities.

    • Pass
    • Flag
    • Fail

    Document with pictures any abnormalities or issues that need to be addressed by Hauschild.

    Add or drag pictures
Source: Global Enterprise - Chewy (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.