HomeIndustries Use Cases PricingResources Book a TourLog In to MaintainXIndustries Use Cases PricingResources Book a TourLog In to MaintainX Back General • InspectionsRefinishing prospect tablesThis is our preferred method for putting a new finish of OSMO furniture wax on prospect tables.Escape Hospitality03/25/2022Refinishing prospect tablesThis is our preferred method for putting a new finish of OSMO furniture wax on prospect tables.Materials neededGreen Scotch Brite padsWhite Scotch Brite padsSports towelsOsmo furniture waxApplication1) Using a green scotch brite pad, sand table in the direction of the grain to remove grease, dirt, and old accumulated wax.2) Wipe table down with lightly moistened sports towel.3) Dry table off with new sports towel.4) Pour small amount of osmo on table. Using a clean, green scotch brite pad, rub osmo into table in the direction of wood grain. Envision pushing the wax into the grain of the wood.5) Continue to add osmo and rub into wood until the entire table has been treated.6) Once finished, go back and remove excess wax from table top using a clean sports towel.7) Let dry for 24 hrs.8) After wax is dry, repeat steps 4-6 with white scotch brite pad.9) Wait 24 hrs for wax to dry before putting the table back in use.Source: Escape Hospitality (Community Member)
Back General • InspectionsRefinishing prospect tablesThis is our preferred method for putting a new finish of OSMO furniture wax on prospect tables.Escape Hospitality03/25/2022Refinishing prospect tablesThis is our preferred method for putting a new finish of OSMO furniture wax on prospect tables.Materials neededGreen Scotch Brite padsWhite Scotch Brite padsSports towelsOsmo furniture waxApplication1) Using a green scotch brite pad, sand table in the direction of the grain to remove grease, dirt, and old accumulated wax.2) Wipe table down with lightly moistened sports towel.3) Dry table off with new sports towel.4) Pour small amount of osmo on table. Using a clean, green scotch brite pad, rub osmo into table in the direction of wood grain. Envision pushing the wax into the grain of the wood.5) Continue to add osmo and rub into wood until the entire table has been treated.6) Once finished, go back and remove excess wax from table top using a clean sports towel.7) Let dry for 24 hrs.8) After wax is dry, repeat steps 4-6 with white scotch brite pad.9) Wait 24 hrs for wax to dry before putting the table back in use.Source: Escape Hospitality (Community Member)