General • Inspections

Bobcat 260 Miller Welder Inspection

Over time, welding equipment and consumables gets worn down. If neglected they will eventually deteriorate and become a safety hazard. Avoid these safety hazards and establish safe welding practice on board by regularly conducting welding safety inspections.

Byer Steel

01/31/2023

Bobcat 260 Miller Welder Inspection

Check oil level add 15W40 as needed
Check for oil leaks if any note on work order of where the leak is.
Check fuel level add regular gas as needed should never be under half tank.
Check air filter
Check wheel make sure all wheels are in working order.
Check cables for cuts repair / replace as needed.
Check to make sure maintenance service light is not on.

Pass
Flag
Fail

Source: Byer Steel (Community Member)

Check oil level add 15W40 as needed

Check for oil leaks if any note on work order of where the leak is.

Check fuel level add regular gas as needed should never be under half tank.

Check air filter

Check wheel make sure all wheels are in working order.

Check cables for cuts repair / replace as needed.

Check to make sure maintenance service light is not on.