Contractor Cubicle Dust Collector Inspection - Quarterly
This procedure covers the quarterly inspection of the Contractor Cubicle Dust Collector to support safe and reliable operation.
Contractor Cubicle Dust Collector Inspection - Quarterly
The aim of this quarterly inspection is to assess the condition and performance of the Contractor Cubicle Dust Collector, identify wear, damage, or maintenance needs, and help ensure it continues to collect dust effectively and operate safely. Procedure Reviewed: Sep 2026
778 - Inspection, Maintenance and Remove/Replace Cartridge Dust Collector 779 - Changing Dust Drums on Dust Collectors at Coating Centers
Dust Collector Inspection
Record filter differential pressure (Inches of Water).
if the answer is "< 0.5 "
Differential pressure is out of tolrance.
Fail if below 0.5 inH20.
if the answer is "> 6 "
Differential pressure is out of tolerance.
Fail if above 6.0 inH20.
Timer sequencing row by row properly.
If dust collector does not have a timer sequencer, select "PASS".
All solenoids are functioning properly.
Hopper discharge device operating properly.
No visible stack emissions.
All filters are present and serviceable.
Additional Notes (As required)
Pictures (As required)
Add or drag pictures
Name of company representative completing Inspection.
(First and Last Name)
Inspection completed by:
(Signature)
Click here to sign
Source: Linde Advance Materials Technology (AMT) - Indianapolis (Community Member)
