General • Inspections

WW PM Weekly Clay Mixer/Motor M-1 Chemineer

The weekly PM for the Clay Mixer and Motor M-1 by Chemineer. Maintenance inspections can identify minor issues before they turn into costly repairs. Inspections ensure machines are working correctly and helps prevent equipment downtime.

087

05/13/2025

WW PM Weekly Clay Mixer/Motor M-1 Chemineer

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

Drive Motor

Wipe dirt from the housing. Inspect the motor for unusual running noises or vibrations. This could indicate damage. Inspect and tighten loose fasteners, anchors, and bolts. Open a corrective work order if needed.

Mixer

Inspect the mixer, shaft, propellors for unusual running noises or vibrations. This could indicate damage. Open a corrective work order if needed.

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 087 (Community Member)

Food Safety Pre-Check

Drive Motor

Wipe dirt from the housing. Inspect the motor for unusual running noises or vibrations. This could indicate damage. Inspect and tighten loose fasteners, anchors, and bolts. Open a corrective work order if needed.

Mixer

Inspect the mixer, shaft, propellors for unusual running noises or vibrations. This could indicate damage. Open a corrective work order if needed.

Food Safety Post-Check