Super Shot Rental Turnover Checklist
The checklist's aim is to ensure that each Super Shot machine is thoroughly inspected, cleaned, and verified for proper operation before being issued to or returned from a rental. This process confirms that all mechanical, electrical, and safety components are in optimal condition, and that any damages, missing parts, or maintenance needs are identified and addressed promptly.
Crafco - Supply Centers Global
11/10/2025
Super Shot Rental Turnover Checklist
The checklist's aim is to ensure that each Super Shot machine is thoroughly inspected, cleaned, and verified for proper operation before being issued to or returned from a rental. This process confirms that all mechanical, electrical, and safety components are in optimal condition, and that any damages, missing parts, or maintenance needs are identified and addressed promptly.
Warning: This maintenance check requires trained personnel with PPE!
Rental Unit #
Hour Meter at time of Inspection
Meter name
Unit
Time Spent Cleaning Unit
Cleaning Comments
Fluid Levels
Diesel. Pass if fluid level is acceptable or just needs to be topped off.
Coolant. Pass if fluid level is acceptable or just needs to be topped off.
Hydraulic. Pass if fluid level is acceptable or just needs to be topped off.
Heat Transfer. Pass if fluid level is acceptable or just needs to be topped off.
Engine Oil. Pass if fluid level is acceptable or just needs to be topped off.
All fluid reservoirs have the correct cap, that is securely fastened.
DOT
Tread (Depth, Flat Spots ,Missing Tread)
Tires are inflated to the proper PSI level.
Lug Nuts
Break Away Cable/Switch
Chains Tow
Pintle Eye
DOT Sticker
DOT Sticker Exp - Exp coming due
Tongue Jack
Lights
Plug Condition
Brake
Left Turn
Right Turn
Markers
Air Compressor
Hoses
Safety Pins
Filter Cover
Air/Water Seperator
Tank Builds Pressure
Air Compressor Oil
Engine
Cover tie down
Fuel Lines
Exhaust
Radiator for leaks
Hoses upper
Hose Lower
Radiator Mounts
Belt - Hose Gen
Belt-Alt/Fan
Motor Mounts
Water/Fuel Sep
Alt mount
Starter
Air Filter
Battery getting weak
Battery: Volts
Tank & Hydraulics
Cap, Present
Hyd O-Ring Leaking?
Hyd Gasket Leaking?
Agitator Chain
Hydrulic Pump/Lines
Lid Switch
Tank Clean
Hose / Wand
Cable Assy
Wand Cover
Handle
Trigger
Trigger lock
Tip/Duck Bill
Pins Hold Down
Hose Cover
Boom
Velcro
Hose Lock
Flow Control Knob
Hose Junction Box
Terminal Blocks
Blue Wires
Blue Wire 1 Amps
Blue Wire 2 Amps
Blue Wire 3 Amps
Trigger Wire
Hose Generator
Belt Tension
Electrical Connections
Blue Exciter Wire Tug
Control Panel
Hose Readout
Material Readout
Hot Oil Readout
Temp Control Knobs set to calibration line
Toggle Switches
Indicator Lights
Door Lock
Burner / Propane - Main Burner
Ignitor
Gas Manifold
Sensor Wire & Nuts
C. A. D. Cell
Solenoid Wire Nuts
Air Band/Shutter
Burner Plug
Mount Bolts
Propane Gas Tank & Spud
Burner / Propane - Side Burner
Ignitor
Gas Manifold
Sensor Wire & Nuts
C. A. D. Cell
Solenoid Wire Nuts
Air Band/Shutter
Burner Plug
Mount Bolts
Propane Gas Tank & Spud
Date of Inspection
Signature of Person Performing Inspection
Click here to sign
Source: Crafco - Supply Centers Global (Community Member)