General • Inspections

AGN-W Site Power Shut Down Procedure

This procedure ensures the entire AGN-W site is powered down safely and in the correct dependency order to prevent data loss, hardware damage, or service disruption.

Capricorn Space Pty Ltd

02/08/2026

AGN-W Site Power Shut Down Procedure

This procedure provides the master, site-wide checklist for safely powering down all AGN-W infrastructure in the correct sequence, covering servers and VMs (Proxmox, ESXi/vCenter hosts), storage (QNAP NAS, MSA2060), network equipment (routers, firewalls, switches), and the fire alarm system, with verification and snapshot steps throughout

SERVER EQUIPMENT SHUT DOWN

AGN-W-RMIT Server Shut Down Procedure

Process to follow to shutdown AGN-W-RMIT

Log in to AGN-W-RMIT

AGN-W-PROXMOX-SERVER

Login to PROXMOX Serever using the root user, make sure you are in the PAM realm (see picture)
Expand AGN-W-RMIT

AGN-W-NB-SDR

Click on "201 (AGN-W-NB-SDR)" VM in the left column
Navigate to the main window and click on ">_ Console"
Log in using your credentials
Type on the command line "sudo shutdown now"
Ensure that "201 (AGN-W-NB-SDR)" VM in the left column is shut down (greyed icon)

AGN-W-WB-SDR

Click on "202 (AGN-W-NB-SDR)" VM in the left column
Navigate to the main window and click on ">_ Console"
Log in using your credentials
Type on the command line "sudo shutdown now"
Ensure that "202 (AGN-W-WB-SDR)" VM in the left column is shut down (greyed icon)

AGN-W-RMIT

Click on AGN-W-RMIT
Click on the Shutdown button found on the top right of the screen

AGN-W-SDR-SERVER Shut Down Procedure

Process to follow to shutdown AGN-W-SDR-SERVER

Log in to AGN-W-SDR-SERVER

AGN-W-PROXMOX-SERVER

Login to PROXMOX Serever using the root user, make sure you are in the PAM realm (see picture)
Expand AGN-W-SDR-SERVER

AGN-W-SDR-Processor

Click on "100 (AGN-W-SDR-Processor)" VM in the left column
Navigate to the main window and click on ">_ Console"
Log in using your credentials
Type on the command line "sudo shutdown now"
Ensure that "100 (AGN-W-SDR-Processor)" VM in the left column is shut down (greyed icon)

AGN-W-SDR-1

Click on "101 (AGN-W-SDR-1)" VM in the left column
Navigate to the main window and click on ">_ Console"
Log in using your credentials
Type on the command line "sudo shutdown now"
Ensure that "101 (AGN-W-SDR-1)" VM in the left column is shut down (greyed icon)

AGN-W-SDR-2

Click on "102 (AGN-W-SDR-2)" VM in the left column
Navigate to the main window and click on ">_ Console"
Log in using your credentials
Type on the command line "sudo shutdown now"
Ensure that "101 (AGN-W-SDR-1)" VM in the left column is shut down (greyed icon)

AGN-W-SDR-SERVER

Click on AGN-W-SDR-Server
Click on the Shutdown button found on the top right of the screen

AGN-W-qMR-1 Shut Down Procedure

AGN-W-rMR-1 Shut Down Procedure

AGN-W-qMR-1

Open Putty
Connect to AGN-W-qMR-1 (See Image for Details
Log in using your credentials
Type at the command prompt - "sudo shutdown now"
Confirm sudo password
Open a command prompt on your local computer
Type at the command prompt - "ping -t 10.80.110.151
Check there is no ping response
This mean the Server is powered off

AGN-W-ESXi-qRqF Shut down Procedure

Procedure to follow to Shut Down AGN-W-ESXi-qRqF

AGN-W-ESXi-qRqF Shut Down

AGN-W-PROXMOX-SERVER

Open the Link above to connect to AGN-W-ESXi-qRqF in a web browser
Login with your credentials

AGN-W-qRqF-1

Select AGN-W-qRqF-1 from the ESXi left menu tree
From the summary tab, click on the Console icon at the top left
Select Open browser console
Press the Space bar if the login menu is not present
Login in with your credentials
Click on the Power Icon at the top right of the screen
Click on the Power Icon again
Click on Power Off from the pop up screen
Check the ESXi console to verify Power is OFF

AGN-W-qRqF-2

Select AGN-W-qRqF-2 from the ESXi left menu tree
From the summary tab, click on the Console icon at the top left
Select Open browser console
Press the Space bar if the login menu is not present
Login in with your credentials
Click on the Power Icon at the top right of the screen
Click on the Power Icon again
Click on Power Off from the pop up screen
Check the ESXi console to verify Power is OFF

AGN-W-ESXi-qRqF Final Actions

Right Click on Host in the ESXi Left Menu
Click on Enter Maintenance Mode
Right Click on Host in ESXi Left Menu
Click on Shut Down
Open a command prompt on your local computer
Type the following at the command prompt - "ping -t 10.80.10.100"
Ensure there is no ping response
The Server should now be powered OFF

AGN-W-ESXi-DRA Shut Down Procedure

Procedure to shut down AGN-W-ESXi-DRA vm server

AGN-G-PROD-SCH1

Select AGN-G-PROD-SCH1 from the right hand menu in VCSA
Click on the Launch Web Console link from the summary tab
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Click on the Windows icon at the bottom left of the screen
Click on the Power icon on the top right of screen
Click on Shut Down (If apply updates are indicated then select NO)
Check the VCSA Server that the power is off
Take a SNAP SHOT

AGN-W-DRA-1

If AGN-W-DRA-1 is not powered off, then do the following
Select the AGN-W-DRA-1 from the right hand menu in VCSA
Click on the Launch Web Console link from the summary tab
Login using your credentials
Click on the Power icon in the Top Righ of the screen
Click on the power icon again from the drop down menu
Click on the Power Off option from the next pop up screen
Check the VCSA server that the power if off
Take a SNAP SHOT

AGN-W-DRA-2

If AGN-W-DRA-2 is not powered off, then do the following
Select the AGN-W-DRA-1 from the right hand menu in VCSA
Click on the Launch Web Console link from the summary tab
Login using your credentials
Click on the Power icon in the Top Righ of the screen
Click on the power icon again from the drop down menu
Click on the Power Off option from the next pop up screen
Check the VCSA server that the power if off
Take a SNAP SHOT

AGN-W-ESXi-MGT1 Shutdown Procedure

Process to follow to shutdown AGN-W-ESXi-MGT1

Login to VSC Server

AGN-W-PROXMOX-SERVER

Open the Link Above

AGN-G-DATABASE01

Select AGN-G-DATABASE01
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off

AGN-G-GRAFANA-01

Select AGN-G-GRAFANA-01
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off

AGN-G-REDMINE

Select AGN-G-REDMINE
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off

AGN-G-TEST-SAM

If AGN-G-TEST-SAM is not already powered OFF
Select AGN-G-TEST-SAM
Click on the Launch Web Console Link
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down
Check on the VCSA Server that the Server shows power as off

AGN-W-AMP

Select AGN-W-AMP
Click on the Launch Web Console Link
Login with the ampadmin user account
Select option "4 System >" from the displayed menu
Select option "5 Shutdown System (halt)" from the displayed System menu
Check on the VCSA Server that the Server shows power as off

AGN-W-APP-01

Select AGN-W-APP-01
Click on the Launch Web Console Link
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down
Check on the VCSA Server that the Server shows power as off

AGN-W-DB-02

Select AGN-W-DB-02
Click on the Launch Web Console Link
Login with your credentials
type on the command line "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server show the power as off.

AGN-W-JUMP

Select AGN-W-JUMP
Click on the Launch Web Console Link
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon
Click on Shut Down
Check on the VCSA Server that the Server shows power as off

AGN-W-LOGS-01

Select AGN-W-LOGS-01
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off

AGN-W-METRIC-01

Select AGN-W-METRIC-01
Click on the Launch Web Console Link
Login with your credentials
type on the command line "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server show the power as off.

AGN-W-NAGIOS

If AGN-W-NAGIOS is not already powered OFF
Select AGN-W-NAGIOS
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off

AGN-W-PROMETHEUS

Select AGN-W-PROMETHEUS
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off

FINAL POWER DOWN ACTIONS for AGN-W-ESXi-MGT1

Right Click on AGN-W-ESXi-MGT1 in VCSA
Right Click on Host in the left Menu
Select enter maintenance mode
Select Shut Down

AGN-W-ESXi-2 Shut Down Procedure

Procedure to follow to power down AGN-W-ESXi- VM Server

AGN-W-ACU-1s

If the Server is not Powered Off Already
Select AGN-W-ACU-1s from the Left Menu of VCSA
Click on the Menu Icon in the bottom left of screen
Click on the Quit icon
Click on Shut Down
If asked to save Track GUI Select Yes
Check Server is power off in VCSA
Take a SNAP SHOT

AGN-W-ACU-2s

If the Server is not Powered Off Already
Select AGN-W-ACU-2s from the Left Menu of VCSA
Click on the Menu Icon in the bottom left of screen
Click on the Quit icon
Click on Shut Down
If asked to save Track GUI Select Yes
Check Server is power off in VCSA
Take a SNAP SHOT

AGN-W-ACU-TEST

Select AGN-W-ACU-Test from the Left Menu of VCSA
Click on the Menu Icon in the bottom left of screen
Click on the Quit icon
Click on Shut Down
If asked to save Track GUI Select Yes
Check Server is power off in VCSA
Take a SNAP SHOT

AGN-W-AD_Server_DC2

Select AGN-W-AD_Server_DC2 from the Left Menu of VCSA
Click on the Launch Web Console
Click on Send Ctrl+Alt+Delete button in the top right corner of the web page
Log in using your credentials.
Click on the Windows Icon in the bottom left of the screen
Click on the Power Icon
Click on Shut Down
Do Not install any Updates if asked.
Take a SNAP SHOT

AGN-W-CPPM-S

*** NOTE CPPM-S MUST BE SHUT DOWN BEFORE CPPM-P ***
Select AGN-W-CPPM-S
Click on the "Launch Web Console" Link
Log in with the appadmin credentials
Type in system shutdown
Check on VCSA server that the host is powered off
Take a SNAP SHOT

AGN-W-FS-1

Select AGN-W-FS-1 from the left menu ion VCSA
Click on the Launch Web Console link
Login in with your credentials
Type on the Command Line - "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server shows the power as off
Take a SNAP SHOT

AGN-W-PROXY-1-BACKUP

If not Powered off Already
Select AGN-W-PROXY-1-BACKUP from the left menu ion VCSA
Click on the Launch Web Console link
Login in with your credentials
Type on the Command Line - "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server shows the power as off
Take a SNAP SHOT

AGN-W-SKYNOPY

Select AGN-W-SKYNOPY from the left menu of VCSA
Click on the Launch Web Console link
Login using your credentials
Click on the Terminal Icon on the left Menu Bar
Type at the command line - "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA Server show the power as off
Take a SNAP SHOT

CS-Proxy-Testing-Server

If not Powered off Already
Select CS-Proxy-Testing-Server from the left menu ion VCSA
Click on the Launch Web Console link
Login in with your credentials
Type on the Command Line - "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server shows the power as off
Take a SNAP SHOT

AGN-W-ESXi-1 Shutdown Procedure

Process to follow to shutdown AGN-W-ESXi-1

Login to VSC Server

AGN-W-PROXMOX-SERVER

Open the Link Above

AGN-W-CBX-SRV-1

Select AGN-W-CBX-SVR-1 from the right hand menu
Click on the Launch Web Console Link from the Summary tab
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon on the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down (If Apply Updates is indicated Select NO)
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-SCH-TEST

Select AGN-W-SCH-TEST from the right hand menu
Click on the Launch Web Console Link from the Summary tab
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down (If Apply Updates is indicated Select NO)
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-ACU-1

Antenna Control Unit for Antenna 1

AGN-W-ACU-1

Select AGN-W-ACU-1 from the right hand menu
Click on the Launch Web Console Link from the Summary tab
Click on the menu icon at the bottom left of screen
Click on the Quit Icon from the menu
Click on Shut Down
If asked to save Track GUI select Yes
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-ACU-2

Antenna Control Unit for Antenna 2

AGN-W-ACU-2

Select AGN-W-ACU-2 from the right hand menu
Click on the Launch Web Console Link from the Summary tab
Click on the menu icon at the bottom left of screen
Click on the Quit Icon from the menu
Click on Shut Down
If asked to save Track GUI select Yes
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-AD_Server_DC1

Select AGN-W-AD_Server_DC1 from the right hand menu
Click on the Launch Web Console Link from the Summary tab
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down (If Apply Updates is indicated Select NO)
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-BVMS-MVS

Select AGN-W-BVMS-MVS from the right hand menu
Click on the Launch Web Console Link from the Summary tab
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-CONFIGMAN-01

Select AGN-W-Configuration Manager 1
Click on the Launch Web Console Link
Login with your credentials
type on the command line "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server show the power as off.
Take a SNAP SHOT

AGN-W-CSAPP02

Select AGN-W-CSAPP02
Click on the Launch Web Console Link
Login with your credentials
type on the command line "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server show the power as off.
Take a SNAP SHOT

AGN-W-CSAPP03

Select AGN-W-CSAPP03
Click on the Launch Web Console Link
Login with your credentials
type on the command line "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server show the power as off.
Take a SNAP SHOT

AGN-W-CSAPP04

Select AGN-W-CSAPP04
Click on the Launch Web Console Link
Login with your credentials
type on the command line "sudo shutdown now"
Confirm sudo password
Confirm that the VCSA server show the power as off.
Take a SNAP SHOT

AGN-W-MSSQL

Shut already be powered off, but if not

AGN-W-MSSQL

Select AGN-W-MSSQL
Click on the Launch Web Console Link
Click on the Send Ctrl+Alt+Delete button in the top right of the web page
Login with your credentials
Click on the windows icon at the bottom left of screen
Click on the Power Icon on the top right of the screen
Click on Shut Down
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-NMS

Shut already be powered off, but if not

AGN-W-NMS

Select AGN-W-NMS
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-OPSAPP01

Shut already be powered off, but if not

AGN-W-OPSAPP01

Select AGN-W-OPSAPP01
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-PROAG01

Shut already be powered off, but if not

AGN-W-PROAG01

Select AGN-W-PROAG01
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-PROXY-1

Shut already be powered off, but if not

AGN-W-PROXY-1

Select AGN-W-PROXY-1
Click on the Launch Web Console Link
Login with your credentials
Click on the Power Icon on the top right of the screen
Type on the command line "sudo shutdown now"
Confirm sudo password
Check on the VCSA Server that the Server shows power as off
Take a SNAP SHOT

AGN-W-CPPM-P

AGN-W-CPPM-S must be shutdown before this VM is shutdown

AGN-W-CPPM-P

AGN-W-VCSA67

This VM MUST BE the last VM shut down This VM must be shutdown from the ESXi-1 host directly

AGN-W-VCSA67

Using a browser, browse to 10.80.10.52
Log in using the root user and password
Find and click on the AGN-W-VCSA67 guest
Click on Actions in the upper right hand side of the screen
Select Power from the drop down menu
Move the cursor to the right and select Power Off
Check the VM listing to ensure the guest has powered down
Take a SNAP SHOT

Final Actions for AGN-W-ESXi-1

FINAL POWER DOWN ACTIONS for AGN-W-ESXi-1

AGN-W-PROXMOX-SERVER

Connect to AGN-W-ESXi-1 server directly by link above
Pending on Browser you need to proceed to website
Login to local admin account on AGN-W-ESXi-1
Right Click on Host in the left Menu
Select enter maintenance mode
Confirm the Host is in Maintenance Mode then Select Shut Down

AGN-W-NAS-01 Shut Down Procedure

QNAP TS4xx Shut Down Procedure

QNAP NAS Shut Down Procedure

Open a Web Browser
Enter the IP Address of the QNAP into the address section
Login to the QNAP with administrator credentials
Click on the drop down arrow for the admin account
Click on Shutdown
Your are prompted with are you sure, Click Yes
Server will now Shut Down

AGN-W-DS-01 Shut Down Procedure

QNAP TS4xx Shut Down Procedure

QNAP NAS Shut Down Procedure

Open a Web Browser
Enter the IP Address of the QNAP into the address section
Login to the QNAP with administrator credentials
Click on the drop down arrow for the admin account
Click on Shutdown
Your are prompted with are you sure, Click Yes
Server will now Shut Down

AGN-W-SHARK Shut Down Procedure

Remote Connection to AGN-W-SHARK

Click into the Search area next to the Windows Icon
Type - "rdp"
From the Best Match Click on Remote Desktop Connection
Enter the the computer name of AGN-W-SHARK
CLick Connect
Login in with your credentials

Windows 10 11 Shut Down Procedure

Click on the Windows Icon

Click on the Power Icon, located at the bottom right of Pop Up

Click on Shut Down

AGN-W-F5 Shut Down Procedure

BigIP i2000 F5 Shut Down Procedure

Connect to F5 BigIP i2000

AGN-W-PROXMOX-SERVER

Power Down

Use a terminal program like PUTTY to SSH into the F5 BigIP i2000
Log in as the root user
Type in shutdown then <enter> - It should look like this... [root@AGN-W-F5:Active:Standalone] config # shutdown
*** IMPORTANT *** Confirm that the device has fully shut down before removing power

HPE MSA2060 Storage Array Shut Down Procedure - (more info required...)

HPE MSA2060 Storage Array Shut Down Procedure ...to be completed on site during the shutdown process...

NETWORK EQUIPMENT SHUT DOWN

AGN-W-RTR-1 Border Router Shut Down Procedure

HSR-6602-XG Router Shut Down Procedure

Power Down

Remove power from device

AGN-W-RTR-2 Border Router Shut Down Procedure

HSR-6602-XG Router Shut Down Procedure

Power Down

Remove power from device

AGN-W-FW-1 Firewall Shut Down Procedure

Palo Alto PA-3220 Firewall Shut Down Procedure

Power Down

Navigate to the "Device>Setup>Operations" window
Look for the "Device Operations" window and click on "Shutdown Device".

AGN-W-FW-2 Firewall Shut Down Procedure

Palo Alto PA-3220 Firewall Shut Down Procedure

Power Down

Navigate to the "Device>Setup>Operations" window
Look for the "Device Operations" window and click on "Shutdown Device".

AGN-W-WAN-STACK Shut Down Procedure

Power Down

Remove power to the switch

AGN-W-7010-1 Shut Down Procedure

Power Down AGN-W-MC-7010-1

Remove power from device

AGN-W-7010-2 Shut Down Procedure

Power Down AGN-W-MC-7010-2

Remove power from device

AGN-W-MGMT-SW01 Shut Down Procedure

Aruba MAS Shut Down Procedure

Power Down AGN-W-MGMT-SW01

Remove power from switch

AGN-W-OFFICE-SW01 Shut Down Procedure

Aruba S1500 Shut Down Procedure

Power Down AGN-W-OFFICE-SW01

Remove power from switch

AGN-W-STARLINK Firewall Shut Down Procedure

Palo Alto PA-410 Firewall Shut Down Procedure

Power Down

Navigate to the "Device>Setup>Operations" window
Look for the "Device Operations" window and click on "Shutdown Device".

FIRE ALARM Shut Down Procedure

• When shut down power the screen will show there is a fault and that the 240v power supply has changed over to battery.

• disconnect a battery terminal to power down system and make sure terminal is not touching anything ( rap with electrical tape)

Source: Capricorn Space Pty Ltd (Community Member)

SERVER EQUIPMENT SHUT DOWN

AGN-W-RMIT Server Shut Down Procedure

Process to follow to shutdown AGN-W-RMIT

Log in to AGN-W-RMIT

Login to PROXMOX Serever using the root user, make sure you are in the PAM realm (see picture)

Expand AGN-W-RMIT

AGN-W-NB-SDR

Click on "201 (AGN-W-NB-SDR)" VM in the left column

Navigate to the main window and click on ">_ Console"

Log in using your credentials

Type on the command line "sudo shutdown now"

Ensure that "201 (AGN-W-NB-SDR)" VM in the left column is shut down (greyed icon)

AGN-W-WB-SDR

Click on "202 (AGN-W-NB-SDR)" VM in the left column

Navigate to the main window and click on ">_ Console"

Log in using your credentials

Type on the command line "sudo shutdown now"

Ensure that "202 (AGN-W-WB-SDR)" VM in the left column is shut down (greyed icon)

AGN-W-RMIT

Click on AGN-W-RMIT

Click on the Shutdown button found on the top right of the screen

AGN-W-SDR-SERVER Shut Down Procedure

Process to follow to shutdown AGN-W-SDR-SERVER

Log in to AGN-W-SDR-SERVER

Login to PROXMOX Serever using the root user, make sure you are in the PAM realm (see picture)

Expand AGN-W-SDR-SERVER

AGN-W-SDR-Processor

Click on "100 (AGN-W-SDR-Processor)" VM in the left column

Navigate to the main window and click on ">_ Console"

Log in using your credentials

Type on the command line "sudo shutdown now"

Ensure that "100 (AGN-W-SDR-Processor)" VM in the left column is shut down (greyed icon)

AGN-W-SDR-1

Click on "101 (AGN-W-SDR-1)" VM in the left column

Navigate to the main window and click on ">_ Console"

Log in using your credentials

Type on the command line "sudo shutdown now"

Ensure that "101 (AGN-W-SDR-1)" VM in the left column is shut down (greyed icon)

AGN-W-SDR-2

Click on "102 (AGN-W-SDR-2)" VM in the left column

Navigate to the main window and click on ">_ Console"

Log in using your credentials

Type on the command line "sudo shutdown now"

Ensure that "101 (AGN-W-SDR-1)" VM in the left column is shut down (greyed icon)

AGN-W-SDR-SERVER

Click on AGN-W-SDR-Server

Click on the Shutdown button found on the top right of the screen

AGN-W-qMR-1 Shut Down Procedure

AGN-W-rMR-1 Shut Down Procedure

AGN-W-qMR-1

Open Putty

Connect to AGN-W-qMR-1 (See Image for Details

Log in using your credentials

Type at the command prompt - "sudo shutdown now"

Confirm sudo password

Open a command prompt on your local computer

Type at the command prompt - "ping -t 10.80.110.151

Check there is no ping response

This mean the Server is powered off

AGN-W-ESXi-qRqF Shut down Procedure

Procedure to follow to Shut Down AGN-W-ESXi-qRqF

AGN-W-ESXi-qRqF Shut Down

Open the Link above to connect to AGN-W-ESXi-qRqF in a web browser

Login with your credentials

AGN-W-qRqF-1

Select AGN-W-qRqF-1 from the ESXi left menu tree

From the summary tab, click on the Console icon at the top left

Select Open browser console

Press the Space bar if the login menu is not present

Login in with your credentials

Click on the Power Icon at the top right of the screen

Click on the Power Icon again

Click on Power Off from the pop up screen

Check the ESXi console to verify Power is OFF

AGN-W-qRqF-2

Select AGN-W-qRqF-2 from the ESXi left menu tree

From the summary tab, click on the Console icon at the top left

Select Open browser console

Press the Space bar if the login menu is not present

Login in with your credentials