Annual OSHA & ANSI/ASME Inspection - Jib Cranes and Hoists
OSHA and ASME allow only qualified persons who have completed training to inspect cranes. Consult operator / service manuals / bulletins as necessary for additional inspection requirements. Make the appropriate mark in the status area, provide follow up details as required.
True North Steel (Trial)
11/10/2025
Annual OSHA & ANSI/ASME Inspection - Jib Cranes and Hoists
OSHA and ASME allow only qualified persons who have completed training to inspect cranes. Consult operator / service manuals / bulletins as necessary for additional inspection requirements. Make the appropriate mark in the status area, provide follow up details as required.
Asset Number
Division Location
Service Status
Max Capacity
Unit Make-Mod
Vin/Serial Number
Date
Documentation / Historical Records
1. A-B30.17-2.1.5 - Inspection Records
2. A-B30.16-2.1.6 - Hoist PM Records
3. A-B30.16-1.2.1 - Hoist Modification Report
4. A-B30.17-4.2.2 - Jib PM Recrods
5. A-B30.17-2.1.2 - Jib Modification Report
6. A-B30.17-2.2.2 - Jib Load Test Report
7. Other
Controls
8. A-B30.16-1.2.12 - Hand Chain
9. A-B30.16-1.1.2 - Marking
10. A-B30.16-1.2.3 - Spring Return
11. A-B30.16-1.2.3 - Pendant Strain Relief
12. A-B30.16-1.1.4 - Safety Warning Tag
13. A-B30.17-1.14.3 - Compass
14. Other
Air / Electric Power
15. A-B30.16-1.3.4 - Electrical Connections
16. A-B30.16-1.3.4 - Air Connections
17. A-B30.16-2.1.4 - Air Lines / Valves
18. A-B30.16-2.1.4 - Electrical Contacts
19. A-B30.16-1.3.4 - Electrical Disconnect
20. A-B30.16-1.2.2 - Resistor Enclosures
21. A-B30.16-1.2.2 - Electrical Enclosures
22. Other
Trolley
23. A-B30.16-2.1.5 - Pins
24. A-B30.16-2.1.4 - Bearings
25. A-B30.16-2.1.4 - Wheels
26. A-B30.16-2.1.4 - Shafts
27. A-B30.16-2.1.4 - Gears
28. A-B30.16-2.1.4 - Rollers
29. A-B30.17-1.9.4 - Bumpers
30. A-B30.17-1.12 - Drop Protection
31. A-B30.17-1.18.2 - Clearance From Obstructions
32. A-B30.17-1.18.1 - Wheel Configurations
33. Other
Hoist
34. A-B30.16-1.2.4 - Sheave Grooves
35. A-B30.16-1.2.4 - Sheave Guards
36. A-B30.16-1.2.6 - Sheave Equalizer
37. A-B30.16-1.2.11 - Hoist Brakes, Electric
38. A-B30.16-1.2.11 - Hoist Brakes, Air
39. A-B30.16-1.2.5 - Drum
40. A-B30.16-1.2.5 - Grooves
41. A-B30.16-1.2.6 - Minimum Two Wraps
42. A-B30.16-2.1.4 - Hand Chain Brakes
43. A-B30.17-1.13.2 - Trolley Brake
44. A-B30.16-1.2.14 - Upper Travel Limit Primary
45. A-B30.16-1.2.14 - Upper Travel Limit Secondary
46. A-B30.16-2.1.4 - Load / Idler Sprocket
47. A-B30.16-2.1.4 - Suspension Housing
48. A-B30.16-1.3.2 - Hoist Support
49. A-B30.16-1.1.1 - Hoist Capacity Marking
50. A-B30.16-1.1.3 - Manufacturer's ID Tag
51. A-B30.16-1.3.3 - Chain Container
52. Other
Jib
53. A-B30.17-1.3.1 - Foundation
54. A-B30.17-1.13.3 - Swing Drive
55. A-B30.17-1.13.3 - Swing Brake
56. A-B30.17-1.9.3 - Swing Stop
57. A-B30.17-2.1.5 - Bearings
58. A-B30.17-1.3.1 - Back Stay & Jib Support
59. A-B30.17-1.3.1 - Jib Capacity Marking
60. A-B30.17-1.2.1 - Clearance from Obstructions
61. A-B30.17-3.5.3 - Hand Signals
62. A-B30.17-1.3.1 - Track / Beam
63. Other
Load Block & Hook
64. A-B30.16-1.1.1 - Capacity Marking
65. A-B30.16-1.2.4 - Sheaves
66. A-B30.16-1.2.9 - Hook Latch
67. A-B30.10-1.10.5 - 0* Hook Bend or Twist
68. A-B30.10-1.10.5 - 5% Hook Opening or 1/4" Max.
69. A-B30.10-1.10.5 - 10% Hook Wear Max.
70. A-B30.16-1.2.9 - Swivel
71. A-B30.16-1.2.4 - Bearing
72. A-B30.16-2.1.3 - Reeving
73. NDT
74. Other
75. A-B30.16-4.4.1 - Load Chain - Primary Hoist
Type
Size
Pitch
Wear
Twist
Distortion
Bow
Lubricate
End
Code
76. A-B30.16-4.5.1 and 4.6.1 - Wire Rope / Cable - Primary Hoist
Type
Size
Constr.
Grade
Core
Measure
Broken Wires
Lubricate
End
Code
Source: True North Steel (Trial) (Community Member)