Back

Verification Record of Elastic Recovery Molds

Procedure ACMP-OP-018: Use this procedure to check that your elastic recovery mold has straight sides for use in forced tests. As well as four accurately machine interlocking brass segments, interchangeable.
Ergon - Lubbock 14842
05/23/2022

Verification Record of Elastic Recovery Molds

27 steps
Procedure ACMP-OP-018: Use this procedure to check that your elastic recovery mold has straight sides for use in forced tests. As well as four accurately machine interlocking brass segments, interchangeable.
  • Date

  • Performed By

  • Manufacturer

  • Serial No

  • Model

  • Caliper ID

  • Timer ID

  • Thermometer ID

  • Comments

  • Molds

  • 30.00mm +/- 0.5 (A)

  • 36.00mm +/- 0.5 (B)

  • 10.00mm +/- 0.1 (C)

  • 10.00mm +/- 0.1 (E)

  • 3.00mm (F)

  • 17.00mm +/- 0.25 (G)

  • 6.00mm +/- 0.1 (I)

  • 36.00mm +/- 0.5 (J)

  • Conditioning Bath

  • Water surface to bottom (50 mm min)

  • Top of mold to surface (25 mm min)

  • Capacity 10 L ?

    • Yes
    • No
    • N / A
  • Temperature

  • Machine

  • Bottom of molds to bath bottom (25 mm min)

  • Top of molds to liquid surface (25 mm min)

  • Rate of Travel

  • 1 min

  • 2 min

  • 3 min

  • Temperature of bath

Source: Ergon - Lubbock 14842 (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.