Back

Quality Acceptance Inspection Checklist

This quality acceptance checklist will help you verify that the product specifications are being met and avoids unnecessary reengineering work later; it also helps confirm the important quantity verification and checks packaging integrity to avoid costly damage during transit. Reduces overall quality risks and cost.
MaintainX
07/21/2022

Quality Acceptance Inspection Checklist

This quality acceptance checklist will help you verify that the product specifications are being met and avoids unnecessary reengineering work later; it also helps confirm the important quantity verification and checks packaging integrity to avoid costly damage during transit. Reduces overall quality risks and cost.
  • PURCHASE ORDER (PO) #:

  • VENDOR NAME:

  • ITEM DESCRIPTION:

  • LOCATION:

  • Are all safety protection and guards in place and functioning properly?

    • Pass
    • Flag
    • Fail
  • Are safety labels installed per manual?

    • Pass
    • Flag
    • Fail
  • Are all access door interlock switches present and functional?

    • Pass
    • Flag
    • Fail
  • Is emergency stop button accessible and operational?

    • Pass
    • Flag
    • Fail
  • Were all hardwire hookups performed by a licensed electrician?

    • Pass
    • Flag
    • Fail
  • Does Vendor-supplied electrical line cord connections match building service wiring?

    • Pass
    • Flag
    • Fail
  • If designed for anchoring, is unit anchored to the floor?

    • Pass
    • Flag
    • Fail
  • Are all hydraulic and pneumatic hoses free of leaks and not kinked?

    • Pass
    • Flag
    • Fail
  • Air Compressor

  • Does air compressor tank (>6” diameter AND >15 psig) have an ASME label?

    • Pass
    • Flag
    • Fail
  • Are air compressor tanks installed such that all drains, handholes, and manholes are easily accessible?

    • Pass
    • Flag
    • Fail
  • Are air compressor tanks installed above ground and in an accessible location?

    • Pass
    • Flag
    • Fail
  • Is a drain pipe and valve installed at the lowest point of every air compressor tank?

    • Pass
    • Flag
    • Fail
  • Is every air compressor tank equipped with a readily visible pressure gauge and with one or more spring-loaded safety valves?

    • Pass
    • Flag
    • Fail
  • Are any valve(s) located between the air compressor tank and the safety valve(s)?

    • Pass
    • Flag
    • Fail
  • Are safety valves located and installed so that they cannot easily be made inoperative by any means, including the elements?

    • Pass
    • Flag
    • Fail
  • Vehicle Lift

  • Is the vehicle lift and accessories ALI certified?

    • Pass
    • Flag
    • Fail
  • Does the lift have required vehicle lifting information and capacity labeling?

    • Pass
    • Flag
    • Fail
  • Do the lift controls operate as intended, provide an unobstructed view of the lift during use, and have an automatic return to neutral or “off” position when released?

    • Pass
    • Flag
    • Fail
  • Does the lift have adequate clearances (around and above)?

    • Pass
    • Flag
    • Fail
  • Do the lift locks engage in the fully extended position?

    • Pass
    • Flag
    • Fail
Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.