Back

CenTraVac Water-Cooled Chiller CDHH - Annual Maintenance

This annual procedure helps you inspect the condenser tubes for fouling and to have it cleaned if necessary. It will also let you inspect and clean the ifm efector flow detection sensors.
MaintainX
05/03/2021

CenTraVac Water-Cooled Chiller CDHH - Annual Maintenance

7 steps
This annual procedure helps you inspect the condenser tubes for fouling and to have it cleaned if necessary. It will also let you inspect and clean the ifm efector flow detection sensors.
  • Inspect the condenser tubes for fouling; clean if necessary.

    • Pass
    • Flag
    • Fail
  • Inspect and clean the ifm efector® flow detection sensors. Use Scotch-Brite® or other non-abrasive material to clean scale; do NOT use steel wool, which could cause the probe to rust.

    • Pass
    • Flag
    • Fail

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.