Back
General • Inspections

JLG | Compact Crawler Booms X1000AJ - Walk-Around Inspection

Walk around inspection checklists are proven to help prevent issues with your Compact Crawler Booms. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
MaintainX
10/13/2022

JLG | Compact Crawler Booms X1000AJ - Walk-Around Inspection

Walk around inspection checklists are proven to help prevent issues with your Compact Crawler Booms. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.

    Notice: Do not overlook visual inspection of chassis underside. Checking this area may result in discovery of conditions which could cause extensive machine damage.

      General

      Begin the "Walk-Around Inspection" at Item 1, as noted on the diagram. Continue checking each item in sequence for the conditions listed in the following checklist.

        WARNING: TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS OFF. DO NOT OPERATE MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.

          INSPECTION NOTE: On all components, make sure there are no loose or missing parts, that they are securely fastened, and no visible damage, leaks or excessive wear exists in addition to any other criteria mentioned.

            1. Platform Assembly, Foot Switch, Ladder and Gate

            Foot switch in good working order, not modified, disabled or blocked. Manual(s) in storage container, access bar slides up and down properly, platform installed and with both caps screwed on. See Inspection Note.

            • Pass
            • Flag
            • Fail

            2. Control Stations

            Switches and buttons return to neutral when activated and released, decals/placards secure and legible, control markings legible.

            • Pass
            • Flag
            • Fail

            3. Outriggers

            See Inspection Note; pads pivot freely

            • Pass
            • Flag
            • Fail

            4. Electrical & Hydraulic Cover Assemblies

            See Inspection Note.

            • Pass
            • Flag
            • Fail

            5. Boom Sections & Turntable

            See Inspection Note.

            • Pass
            • Flag
            • Fail

            6. Drive Tracks

            Properly Adjusted. See Inspection Note.

            • Pass
            • Flag
            • Fail

            7. Lithium Ion Battery Pack

            Free of debris and see Inspection Note.

            • Pass
            • Flag
            • Fail

            8. Swing Drive & Turntable Bearing

            Check for proper lubrication. See Inspection Note.

            • Pass
            • Flag
            • Fail

            9. Hydraulic Tank

            Hydraulic oil level correct and see Inspection Note.

            • Pass
            • Flag
            • Fail

            10. Electric Motor or Combustion Engine and Hydraulic Pump

            See Inspection Note.

            • Pass
            • Flag
            • Fail

            11. Platform Rotator & Machine Bubble Level

            See Inspection Note.

            • Pass
            • Flag
            • Fail
          Source: MaintainX (Community Member)

          Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.