Back

JLG | Scissor Lifts 260MRT - Walk-Around Inspection

Walk around inspection checklists are proven to help prevent issues with your rollback carrier. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
MaintainX
10/13/2022

JLG | Scissor Lifts 260MRT - Walk-Around Inspection

Walk around inspection checklists are proven to help prevent issues with your rollback carrier. Proper inspections will always lead to better quality of the life of your equipment and reduce costs.
    • 3.PNG

    WARNING: TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS “OFF” DURING WALKAROUND INSPECTION

      NOTICE: DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS AREA OFTEN RESULTS IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTENSIVE MACHINE DAMAGE.

        NOTE: On each item, make sure there are no loose or missing parts, that they are securely fastened, and that no visible damage exists in addition to any other criteria mentioned.

          1. Platform Controls - Properly secured, no loose or missing parts, no visible damage. Placards secure and legible, control switches return to neutral when activated and released, emergency stop switch functions properly. Control markings legible, manual in manual storage box.

          • Pass
          • Flag
          • Fail

          2. Steer Linkage - See Note

          • Pass
          • Flag
          • Fail

          3. Wheels and Tires - Properly secured, no missing lug nuts. Refer to section 6, Tires and Wheels. Inspect wheels for dam- age and corrosion.

          • Pass
          • Flag
          • Fail

          4. Drive Motor, Left Front (4 Wheel Drive) - See Note. No evidence of leakage.

          • Pass
          • Flag
          • Fail

          5. Drive Brake, Left Front (4 Wheel Drive) - See Note. No evidence of leakage.

          • Pass
          • Flag
          • Fail

          6. Lift Cylinder - See Note.

          • Pass
          • Flag
          • Fail

          7. Fuel Tank (Gasoline or Diesel Engine) - Filler cap secure, sight gauge visible, no damage or leaks.

          • Pass
          • Flag
          • Fail

          8. Hydraulic Tank - Filler cap secure, sight gauge visible, no damage or leaks.

          • Pass
          • Flag
          • Fail

          9. Ground Controls - Placard secure and legible, control switches return to neutral position when activated and released, emergency stop switch functions properly. Control markings legible.

          • Pass
          • Flag
          • Fail

          10. Control Valve - See Note

          • Pass
          • Flag
          • Fail

          11. Drive Motor, Left Rear - See Note

          • Pass
          • Flag
          • Fail

          12. Drive Brake, Left Rear - No loose or missing parts, no visible damage, no evidence of leakage

          • Pass
          • Flag
          • Fail

          13. Manual Descent Cable and Pull Handle - See Note.

          • Pass
          • Flag
          • Fail

          14. Ladder - No damage, securely attached.

          • Pass
          • Flag
          • Fail

          15. Speed Cutout Switch - No visible damage, properly secured.

          • Pass
          • Flag
          • Fail

          16. Battery Installation (Gasoline or Diesel Engine) - Proper electrolyte level, cables secure, no damage or corrosion. Hold-downs secure.

          • Pass
          • Flag
          • Fail

          17. Hydraulic Pump - Pump properly secured, no visible damage, no evidence of leakage. Hoses and fittings properly secured, no visible damage, no evidence of leaks.

          • Pass
          • Flag
          • Fail

          18. Engine Installation - Engine oil to full mark on dipstick, oil filler cap secure. Muffler/exhaust system properly secured, no leakage. Air filter assembly secure, no loose or missing parts, element clean. Radiator cap secure, coolant to correct level.

          • Pass
          • Flag
          • Fail

          19. Steer Cylinder and Tie Rod Ends - No loose or missing parts, no visible damage. No steer cylinder leaks or damage.

          • Pass
          • Flag
          • Fail

          20. Platform Assembly (Not Shown) - See Note. Platform deck extension operates properly.

          • Pass
          • Flag
          • Fail
        Source: MaintainX (Community Member)

        Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.