Perform the Function Check as follows:
From the ground control console with no load in the platform:
From the platform control console:
With the platform in the stowed position:
Place the machine in Transport Mode. Ensure machine is positioned in a smooth, firm surface and drive machine with boom elevated beyond 8 horizontal. Ensure drive speed is reduced while operating.
Skyguard Funtion Test
From the Platform Console in an area free from obstructions:
Activate the Skyguard Sensor:
Once the sensor has been activated, verify the following conditions:
Note: If a Skyguard is enabled with the Soft Touch system, functions will cut out instead of reversing.
Note: On machines equipped with Skyline, reattach magnetic end of the cable to the bracket.
Source: MaintainX (Community Member)