Back

Bosch ACS 863 Air Conditioner Service Maintenance

The Bosch ACS 863 Air Conditioner Service Maintenance form focuses on your equipment's filters. It provides detailed instructions on how to change filters, check the remaining capacity, and even how to replace it. Ensure high-quality performance by using this service maintenance form.
MaintainX
04/26/2021

Bosch ACS 863 Air Conditioner Service Maintenance

The Bosch ACS 863 Air Conditioner Service Maintenance form focuses on your equipment's filters. It provides detailed instructions on how to change filters, check the remaining capacity, and even how to replace it. Ensure high-quality performance by using this service maintenance form.

    Change filter

    Filter Maintenance

    The filter is designed to trap acid and particulates, and to remove water from refrigerant. To meet this mandate, the filter must be replaced after (SEE TABLE) of refrigerant has been filtered.

    The unit gives a warning when (SEE TABLE) of the filter capacity has been used; the unit locks down when the (SEE TABLE) filter capacity has been reached and will no longer function.

    Check Remaining Filter Capacity

    Select Filter Maintenance from the Maintenance Menu or when the machine prompts. The machine displays:

    Replace the Filter

    ENTER NEW FILTER SERIAL NUMBER

    NOTE: If SERIAL NUMBER WRONG is displayed, the serial number has been incorrectly entered or the filter has already been used in this machine.

    The machine clears the existing filter and displays:

    CAUTION: Use only authentic Bosch filters in this machine. All performance tests and claims are based on using this specific filter

    Figure 1-4. Filter Location

    • 1.PNG

    Scales Reset

    This procedure should be carried out regularly, as the deviation from the zero point of the oil/dye scales is corrected in the process.

    NOTE: To remove the “PAG”, “POE” and “UV Dye” bottles, you must pull the lever on the colored covers of the bottles slightly to unlock and pull them outward. Instead to remove the oil drain bottle it is enought pulling it straight outwards

Source: Bosch

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.