Property Management • Maintenance

Lennox LRP16HP Package Heat Pump Maintenance

The Lennox LRP16HP Package Heat Pump Maintenance Form focuses on the Outdoor Unit. This maintenance form must be performed by a qualified installer or service agency only. You will be provided with a complete checklists containing different parts of your equipment for thorough inspection ensuring you quality performance at all times.

MaintainX

04/26/2021

Lennox LRP16HP Package Heat Pump Maintenance

The Lennox LRP16HP Package Heat Pump Maintenance Form focuses on the Outdoor Unit. This maintenance form must be performed by a qualified installer or service agency only. You will be provided with a complete checklists containing different parts of your equipment for thorough inspection ensuring you quality performance at all times.

WARNING : Electric Shock Hazard. Can cause injury or death. Unit must be properly grounded in accordance with national and local codes. Line voltage is present at all components when unit is not in operation on units with single-pole contactors. Disconnec

Periodic inspection and maintenance normally consists of changing or cleaning the filters and cleaning the outdoor coil. On occasion, other components may also require cleaning.

Filters

Filters are not supplied with the unit. Inspect once a month. Replace disposable or clean permanent type as necessary. Do not replace permanent type with disposable.

Motors

Indoor and outdoor fan and vent motors are permanently lubricated and require no maintenance.

Some models may be equipped with a permanent magnet, constant torque indoor blower motor. These motors remain energized and are controlled by 24V signals.

For high static applications, use tap 3 for cooling speed and tap 5 for heating speed. Refer to the heater installation label for limitations to blower tap selection on heating speeds.

Outdoor Coil

Dirt and debris should not be allowed to accumulate on the outdoor coil surface or other parts in the air circuit.

Cleaning should be as often as necessary to keep the coil clean.

Use a brush, vacuum cleaner attachment, or other suitable means. If water is used to clean the coil, be sure the power to unit is shut off prior to cleaning.

Care should be used when cleaning the coil so that the coil fins are not damaged.

Source: Lennox