HomeIndustries Use Cases PricingResources Book a TourLog In to MaintainXIndustries Use Cases PricingResources Book a TourLog In to MaintainX Back Fleet Management • InspectionsJLG Vertical Mast Nano: Pre-Operation ChecklistUse this checklist and inspection form at the beginning of each workshift or at each change of operator.MaintainX10/11/2022JLG Vertical Mast Nano: Pre-Operation ChecklistUse this checklist and inspection form at the beginning of each workshift or at each change of operator.PRE-OPERATION CHECKSEnsure there are no obvious signs of mechanical damage to the handrails, platform, lifting structure or chassis.Check platform access gate closes when released and that the latch engages correctly.Check castors and wheels rotate freely and are undamaged.Check castor wheel and castor fixings. Check circlip (red ring) is correctly located on end of stub axle and retained with hub cap. Check emergency lowering is functioning correctly.Ensure the battery (where applicable) is fully charged, referring to the LED or dial battery condition indicator on the pendant controllerEnsure the hydraulic oil level is at the correct level. Do not overfill.Check there are no hydraulic oil leaks and that all hydraulic connections are tight.Cordon off area around machine in accordance with guidelines.Source: MaintainX (Community Member)
Back Fleet Management • InspectionsJLG Vertical Mast Nano: Pre-Operation ChecklistUse this checklist and inspection form at the beginning of each workshift or at each change of operator.MaintainX10/11/2022JLG Vertical Mast Nano: Pre-Operation ChecklistUse this checklist and inspection form at the beginning of each workshift or at each change of operator.PRE-OPERATION CHECKSEnsure there are no obvious signs of mechanical damage to the handrails, platform, lifting structure or chassis.Check platform access gate closes when released and that the latch engages correctly.Check castors and wheels rotate freely and are undamaged.Check castor wheel and castor fixings. Check circlip (red ring) is correctly located on end of stub axle and retained with hub cap. Check emergency lowering is functioning correctly.Ensure the battery (where applicable) is fully charged, referring to the LED or dial battery condition indicator on the pendant controllerEnsure the hydraulic oil level is at the correct level. Do not overfill.Check there are no hydraulic oil leaks and that all hydraulic connections are tight.Cordon off area around machine in accordance with guidelines.Source: MaintainX (Community Member)