General • Inspections

BUNN | LCA-2 LP (with Scholle 1910LX) - Daily Cleaning & Preventive Maintenance Instructions

Use this checklist for the daily cleaning and maintenance of your coffee machine. It provides many benefits including general hygiene and improving the taste of your coffee.

MaintainX

12/07/2022

BUNN | LCA-2 LP (with Scholle 1910LX) - Daily Cleaning & Preventive Maintenance Instructions

Use this checklist for the daily cleaning and maintenance of your coffee machine. It provides many benefits including general hygiene and improving the taste of your coffee.

General Cleaning and Sanitizing Procedures

Note: The BUNN® LCA-2 LP dispenser incorporates a “user selectable” rinse reminder feature, which lights the Rinse LED on the front panel when it is time to rinse. See Programming Functions to activate this feature

Daily: RINSING

Open the dispenser door and set the Function Switch to Rinse and the Mode Selector Switch to RUN
Close the dispenser door and place a 1/2 gal (2 liter) container under the dispense nozzle area.
Activate both dispense switches until the water is clear or has no concentrate coloring in it, (10 to 20 sec.).
Open the dispenser door, set the Function Switch back to Normal
Note: To clear the “Rinse” warning, activate both dispense switches (one at a time) until the flow stops automatically (approximately 20 sec. for each tip). The “Rinse” LED will turn off when the Rinse time has been satisfied.

Daily: PARTS WASHING

Remove and wash the drip tray and drip tray cover in a mild detergent solution. Rinse thoroughly.
Wipe the splash panel, dispense nozzles, door, and cabinet with a clean damp cloth.

PREVENTIVE MAINTENANCE

Bunn-O-Matic® Corporation recommends that preventive maintenance be performed at regular intervals. Maintenance should be performed by a qualified service technician. For Technical Service, contact Bunn-O-Matic® Corporation at 1-800-286-6070.
NOTE: Replacement parts or service caused by failure to perform required maintenance is not covered by warranty. Replace pump hoses every 6-Months or as needed.

Source: MaintainX (Community Member)

General Cleaning and Sanitizing Procedures

Note: The BUNN® LCA-2 LP dispenser incorporates a “user selectable” rinse reminder feature, which lights the Rinse LED on the front panel when it is time to rinse. See Programming Functions to activate this feature

Daily: RINSING

Open the dispenser door and set the Function Switch to Rinse and the Mode Selector Switch to RUN

Close the dispenser door and place a 1/2 gal (2 liter) container under the dispense nozzle area.

Activate both dispense switches until the water is clear or has no concentrate coloring in it, (10 to 20 sec.).

Open the dispenser door, set the Function Switch back to Normal

Note: To clear the “Rinse” warning, activate both dispense switches (one at a time) until the flow stops automatically (approximately 20 sec. for each tip). The “Rinse” LED will turn off when the Rinse time has been satisfied.

Daily: PARTS WASHING

Remove and wash the drip tray and drip tray cover in a mild detergent solution. Rinse thoroughly.

Wipe the splash panel, dispense nozzles, door, and cabinet with a clean damp cloth.

PREVENTIVE MAINTENANCE

Bunn-O-Matic® Corporation recommends that preventive maintenance be performed at regular intervals. Maintenance should be performed by a qualified service technician. For Technical Service, contact Bunn-O-Matic® Corporation at 1-800-286-6070.

NOTE: Replacement parts or service caused by failure to perform required maintenance is not covered by warranty. Replace pump hoses every 6-Months or as needed.