Drive belts tensioning and Calibration (WALLTEQ M-380)
We will take the step by step procedure of how tensioning the belts according to the WALLTEQ commissioning file and Homag's technician, but keep in mind that the length of each drive belt=38.1 m (38100mm) -------> 35,1m flat +3m if the omega drive.
Please note that for that type of belt we will be needing 0.9mm tensioning for each meter so the overall tensioning will be =38.1 X 0.9= 34.3mm (17.15 mm for each side)
Drive belts tensioning and Calibration (WALLTEQ M-380)
We will take the step by step procedure of how tensioning the belts according to the WALLTEQ commissioning file and Homag's technician, but keep in mind that the length of each drive belt=38.1 m (38100mm) -------> 35,1m flat +3m if the omega drive.
Please note that for that type of belt we will be needing 0.9mm tensioning for each meter so the overall tensioning will be =38.1 X 0.9= 34.3mm (17.15 mm for each side)
Procedure Max Score: 27
Drive belts tensioning
Calibration
Source: ABIC (Community Member)