Back

2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months

The 2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months form contributes to a safer working environment and prevent costly lift truck repairs. Maximize your forklifts capabilities by consistently performing maintenance.
MaintainX
04/26/2021

2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months

The 2015 DOOSAN G20SC-5 Pneumatic Forklifts 2500 Hours/ 15 Months form contributes to a safer working environment and prevent costly lift truck repairs. Maximize your forklifts capabilities by consistently performing maintenance.

    You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures.

    Hydraulic Oil - Change, Check, Clean

    WARNING: Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.

    Park the lift truck level with the forks lowered, park- ing brake engaged, transmission in NEUTRAL and the engine stopped.

    • 19.PNG

    Inspect Battery System

    • 20.PNG

    Replace Oxygen Sensor (G420F(E) Engine Only)

    • 21.PNG

    When indicated by MIL, replace oxygen seasor on the exhaust manifold and oxygen sensor on muffler assembly.

    WARNING: When assembling the filters, check the arrow mark on the filter surface. The arrow mark position is same as fuel flow direction.

    Checking the TMAP Sensor (G420F(E) Engine Only)

    • 22.PNG

    Inspect for Intake Leaks (G420F(E) Engine Only)

    Replace PCV Valve and breather element (LP-Gas, Gasoline and Dual Fuel Engines) - Change

    Replace Spark Plugs (G420F(E) Engine Only)

    WARNING: DO NOT OVER TIGHTEN THE SPARK PLUGS.

    (1) Ignition wiring harness (2) Ignition Coil Assy (3) Spark plug

Source: Doosan

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.